T: 01474 357350 | F: 01474 537887

Knowledgebase - Digital Blue Digital Movie Creator

Article - After recording a video and playing it back; you see bands of lines that flicker across the image.

»Article Information

Issued: Thursday, 01 April 2004
Last updated: n/a
Difficulty: Low (3)

»Product Information

Product Name: Digital Blue Digital Movie Creator
Operating System (OS): Windows

»Summary of Problem

Problem: After recording a video and playing it back; you see bands of lines that flicker across the image.
Type: Hardware

»Description of Solution

Solution: This is sometimes caused by extremely bright lights; but most often it is the result of an improper setting on the camera device. The camera must be configured to work with the lights in your specific country. If you are filming near an extremely bright light source; try moving away from it. If the problem persists; the hertz setting on the camera needs to be changed. To change this switch; open the battery compartment with a small Philips screwdriver and move the switch to the appropriate setting.
Web link: http://www.playdigitalblue.com/tech_support/dmc/issues/problems/

»Disclaimer

The information provided in the TAG Knowledge Base is provided "as is" without warranty of any kind. TAG disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall TAG Learning Ltd or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if TAG Learning Ltd or its suppliers have been advised of the possibility of such damages. Some countries do not allow the exclusion or limitation of liability for consequential or incidental damages so the foregoing limitation may not apply.